MPCEE

Below you will find a number of questions, designed to allow us to give the feedback you require, to supply real solutions using advanced dewatering technologies at any particular location, where the reduction of moisture content will play a critical part in the future profit or loss of a disposable waste stream. This will include an indication of capital and operating costs, along with pay back, to turn an environmental liability (sludge and slurries) into a profit source from the sale of the end by-product to a wider market place.

 

HOW TO TURN AROUND A COST FOR DISPOSAL OF THE WASTE INTO A PROFIT FROM ITS SALE

                                                                                                               

Assumptions:

 

1US Ton = 2000 lbs = 907 Kgs; 1 Metric Tonne = 1000 Kgs = 1.1025 US Tons;

1 Mega Watt = 1000 Watts = 1 Kilo Watt; State Exchange Rate Used to convert to US$

 

·         The annual tonnage of sludge and slurries produced?

·         The quantities and types of sludge and slurries produced e.g. de-inking, recycling?

·         The present percentage of solids currently produced and/or moisture content?

·         The percentage of solids ideally required (depending on end use)?

·         What is the end use or disposal at present of the solids?

·         Indicate what it could be used for, as we are working with other industries to enable commercial disposal?

·         What is the power cost in US$ per KW/H?

·         Do you have a dry weight BTU value for the mixed sludge?

·         What is the estimate of power value in KW/H from burning the sludge?

·         What does it cost to evaporate 2,000 lbs of water?

·         Using your present processes, what would be the environmental impact of doing nothing?

·         What are the present process type(s) being used and a breakdown of the present operating costs for dealing with the sludge and slurries, by process type?

·         What are the alternative options and different costs?

·         Do you have any preconceived issues associated with the technology and or the contractual process?

·         Do you have additional thoughts as to what you want covered in the pre-feasibility study?

·         Is there other information that may be relevant?

All information supplied is treated in absolute confidence for the purposes of a basis for any further dialogue or negotiation. The responses do neither tie nor infer any contractual obligation on either party.

 

Return to Dewatering Technologies Page

Go to Online Pre-feasibility Study Questions

 

For more information on the operations of MPCEE click on:

Selectapage